Black Max Damping for a Smoother Gladiator Ride
The Skyjacker B8396 is a Black Max rear shock absorber built for 2020-2024 Jeep Gladiator JT trucks running a 1 to 2 inch lift. The B8396 uses Skyjacker’s Black Max twin tube design with a foam cell technology that reduces fluid aeration, keeping damping consistent even during repeated compression cycles on rough roads or trails.
Owners who have added a small leveling kit or light lift to their Gladiator often need a rear shock matched to that new ride height, and the B8396 fills that role directly. The B8396 bolts in at factory mounting points, so no cutting, drilling, or bracket fabrication is needed for a correctly lifted Gladiator in the 1 to 2 inch range. Twin tube construction in the B8396 also helps dampen small road vibrations for a smoother street ride alongside solid off road control.
Key Features
- Black Max twin tube shock design
- Foam cell technology reduces fluid aeration
- Direct bolt in fit at factory mounting points
- Matched to 1 to 2 inch lifted Gladiator applications
- Consistent damping on street and trail
- Rear position shock absorber
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2020-2024 | Jeep | Gladiator | Sport |
| 2020-2024 | Jeep | Gladiator | Rubicon |
| 2020-2024 | Jeep | Gladiator | Mojave |
| 2020-2024 | Jeep | Gladiator | Overland |
Specifications
| Detail | Value |
|---|---|
| MPN | B8396 |
| UPC | Not Published |
| Shock Type | Black Max twin tube |
| Position | Rear |
| Lift Range | 1 to 2 inch |
What’s Included
- Rear shock absorber
- Mounting hardware
About Skyjacker
Skyjacker has engineered suspension lift systems and shocks since 1970, with the Black Max line built to deliver reliable damping for lifted trucks and Jeeps. The B8396 continues that tradition, giving Gladiator owners a rear shock matched to a light lift setup.
Related Parts
- Skyjacker Gladiator Front Rear Control Arm Component Box
- Skyjacker Gladiator Front Coilover Shock Set
FAQ
What is the B8396?
The B8396 is a Skyjacker Black Max rear shock absorber designed for 2020-2024 Jeep Gladiator JT trucks with a 1 to 2 inch lift.
Does the B8396 fit all Gladiator trims?
Yes, the B8396 fits Sport, Rubicon, Mojave, and Overland Gladiator trims from 2020 through 2024.
What lift height is the B8396 designed for?
The B8396 is designed for Gladiator applications with a 1 to 2 inch lift.
Is the B8396 a twin tube or monotube shock?
The B8396 uses Skyjacker’s Black Max twin tube design with foam cell technology.
Does the B8396 require drilling to install?
No, the B8396 bolts in at factory mounting points on a correctly lifted Gladiator.
Can the B8396 be used on a stock height Gladiator?
The B8396 is valved specifically for a 1 to 2 inch lifted Gladiator and is not intended for stock ride height.
Where does the B8396 mount on the Gladiator?
The B8396 mounts at the rear shock position of the Gladiator JT.
Is professional installation required for the B8396?
The B8396 can be installed with common hand tools, though professional installation is recommended for proper torque specifications.
Install Instructions
- Raise and support the rear of the Gladiator on jack stands.
- Remove the factory rear shock from upper and lower mounts.
- Install the B8396 shock at the factory mounting points.
- Torque all mounting hardware to specification.
- Repeat on the opposite side.
- Lower the vehicle and cycle the suspension to check clearance.
Prop 65 Warning
This product can expose you to chemicals including chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
