Ridetech Power Steering Box Reinforcement Bracket for 1963-1982 Corvette with Borgeson Box
The Ridetech Power Steering Box Reinforcement Bracket, MPN 11539535, is a bolt-on frame and steering box brace for a 1963-1982 Chevrolet Corvette C2 or C3 equipped with a Borgeson 1st generation power steering box. This bracket is not compatible with the Borgeson 2nd generation steering box.
Key Features
- Power steering box reinforcement bracket, part 11539535
- Bolt-on frame and steering box brace
- For use with the Borgeson 1st generation steering box
- Not compatible with the Borgeson 2nd generation steering box
- Ships as bracket kit 11539535 with mounting hardware
Fitment
| Vehicle Application | Position |
|---|---|
| 1963-1982 Chevrolet Corvette (C2/C3) with Borgeson 1st generation power steering box | N/A |
Specifications
| Detail | Value |
|---|---|
| MPN | 11539535 |
| Retailer SKU | RID11539535 |
| Shipping Weight | 5 lbs |
| Function | Bolt-on frame and steering box brace |
What’s Included
- 1 power steering box reinforcement bracket
- Mounting hardware
About Ridetech
Ridetech engineers air suspension, coilovers, and chassis components in the USA and tests every system on real vehicles. Bracket 11539535 is part of Ridetech’s C2/C3 Corvette steering support lineup.
Related Parts
- Ridetech 63-82 Chevy Corvette Front Sway Bar
- Ridetech 68-79 Chevy C3 Corvette Front TruTurn System
FAQ
Does this fit the Borgeson 2nd generation steering box?
No. This bracket is not compatible with the Borgeson 2nd generation steering box.
What steering box does this bracket require?
This bracket is designed for use with a Borgeson 1st generation power steering box.
What does this bracket do?
The bracket is a bolt-on frame and steering box brace that reinforces the steering box mounting.
What is the shipping weight of this bracket?
The bracket ships at approximately 5 pounds.
Does this fit a C2 Corvette?
Yes. This bracket fits both C2 and C3 Corvettes from 1963 to 1982 with the correct steering box.
Is mounting hardware included?
Yes. Mounting hardware is included with the bracket.
Does this bracket replace the steering box?
No. This bracket reinforces the existing Borgeson 1st generation steering box mount and does not replace the box itself.
Can I install this bracket myself?
Yes. This bracket is a bolt-on part that most owners can install with basic hand tools.
Installation Instructions
- Raise the front of the vehicle and support the frame on jack stands
- Locate the Borgeson power steering box mounting area on the frame
- Bolt the reinforcement bracket to the frame and steering box mount
- Torque all fasteners to the manufacturer’s specification
- Lower the vehicle and verify steering box clearance before driving
California Proposition 65 Warning
WARNING: This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.
