Motorsport Styling Meets Application-Specific Engineering
The ICON Alloys Hulse 8017855557DB brings a concave, motorsport-inspired 12-window face to a 17×8.5 wheel built around a 5×150 bolt pattern. Backspacing and offset are dialed in to maximize caliper clearance and complement an ICON Vehicle Dynamics suspension setup, all finished in a durable Double Black powder coat.
Key Features
- Aggressive concave profile with a 12-window spoke design
- 17×8.5 size with a 5×150 bolt pattern and 25mm offset
- 5.75 inch backspacing engineered to reduce scrub radius and improve handling
- Double Black powder coat finish resists corrosion and holds up to off-road use
- One-piece cast aluminum alloy construction
- 2,750 lb load rating
- Application-specific dimensions optimize tire clearance and vehicle dynamics
Fitment
| Year Range | Make | Model | Notes |
|---|---|---|---|
| N/A | N/A | N/A | ICON does not publish a specific vehicle application list for this bolt pattern on the Hulse product page. The 5×150 bolt pattern is commonly used on Toyota Land Cruiser and Tundra platforms, but confirm hub bore and backspacing against your specific vehicle before purchase. |
Specifications
| Detail | Value |
|---|---|
| MPN | 8017855557DB |
| UPC | 840103431642 |
| Wheel Size | 17 x 8.5 |
| Bolt Pattern | 5 x 150 |
| Offset | 25mm |
| Backspacing | 5.75 in |
| Load Rating | 2,750 lbs |
| Finish | Double Black powder coat |
| Construction | Aluminum alloy |
What’s Included
- One ICON Alloys Hulse wheel
- Center cap
About ICON
ICON Vehicle Dynamics designs suspension systems and ICON Alloys wheels engineered to work together, with wheel backspacing and offset dimensions calculated to reduce scrub radius and preserve suspension travel. The Hulse continues that approach with a race-inspired look built for trucks and SUVs.
FAQ
What is the 8017855557DB?
It is the ICON Alloys Hulse wheel in a 17×8.5 size with a 5×150 bolt pattern, 25mm offset, and Double Black finish.
What bolt pattern does this wheel use?
This wheel uses a 5×150 bolt pattern, which is common on Toyota Land Cruiser and Tundra platforms.
What is the backspacing on this wheel?
Backspacing is 5.75 inches with a 25mm offset.
What is the load rating of this wheel?
This wheel carries a 2,750 lb load rating.
Does ICON publish a specific vehicle fitment list for this wheel?
No published vehicle-specific application list is provided for this bolt pattern on the manufacturer page, so confirm hub bore and backspacing against your vehicle before ordering.
What material is this wheel made from?
The Hulse is constructed from one-piece cast aluminum alloy.
What finish options are available for the Hulse wheel?
The Hulse is offered in Double Black powder coat or Silver Machined finishes.
Does this wheel include a center cap?
Yes, a center cap with the ICON logo is included with each wheel.
Is professional mounting recommended for this wheel?
Yes, professional mounting and balancing of an appropriately sized tire is recommended prior to installation.
Install Instructions
- Confirm the wheel’s bolt pattern, offset, and backspacing match your vehicle’s hub and suspension clearance.
- Have the wheel professionally mounted and balanced with an appropriately sized tire.
- Raise and safely support the vehicle, then remove the factory wheel.
- Mount the new wheel onto the hub, threading lug nuts or bolts by hand to start.
- Torque lug nuts or bolts to the vehicle manufacturer’s specification in a star pattern.
- Lower the vehicle and re-torque after the first 50-100 miles of driving.
Prop 65 Warning
This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
