Correct the Sway Bar Angle After Your Bronco Lift
Lifting a Ford Bronco changes the working angle of the factory front sway bar, which can bind suspension travel and reduce off road articulation. The ICON Sway Bar Drop Kit repositions the front sway bar to restore a proper working angle on lifted 2021 and newer Broncos, freeing up wheel travel and improving ride quality on the trail.
Key Features
- Drops the front sway bar mounting position to correct geometry after a lift
- Restores proper sway bar working angle for improved articulation off road
- Reduces binding and stress on sway bar end links at lifted ride heights
- Includes spacers and all necessary mounting hardware
- Direct bolt-on installation using factory mounting locations
- Recommended for Broncos lifted 2 inches or more
Fitment Table
| Year Range | Make | Model |
|---|---|---|
| 2021-2026 | Ford | Bronco |
Specifications
| Detail | Value |
|---|---|
| MPN | 611083 |
| Brand | ICON Vehicle Dynamics |
| Position | Front |
| Body Style | 2-Door and 4-Door |
| Kit Contents | 2 sway bar spacers plus hardware |
| Recommended Lift | 2 inches or more |
What’s Included
- Two ICON sway bar spacers
- Mounting hardware and washers
- Installation instructions
About ICON
ICON Vehicle Dynamics designs and builds vehicle specific suspension components engineered for real world off road performance without sacrificing on road comfort. The Sway Bar Drop Kit is a companion part designed to work alongside ICON’s Bronco coilover and lift systems.
Related Parts on Our Site
- ICON 2.5 VS RR CDCV Rear Shocks Pair for 2025-2026 4Runner
FAQ
What is the 611083?
The 611083 is an ICON front sway bar drop kit for the 2021 and newer Ford Bronco, designed to correct sway bar geometry after a suspension lift.
Do I need this kit if I lift my Bronco?
ICON recommends this kit for Broncos lifted 2 inches or more to restore proper front sway bar working angle and reduce binding.
Does this kit fit both 2-door and 4-door Broncos?
Yes, this sway bar drop kit fits both 2-door and 4-door 2021 and newer Ford Bronco models.
What is included in the kit?
The kit includes two sway bar spacers along with all necessary mounting hardware.
Will this kit work with other suspension brands?
This kit is designed to work with ICON lift systems, though it can be compatible with other lifted Bronco suspension setups since it uses factory mounting points.
Does installing this kit require any cutting or modification?
No, this kit installs using factory mounting locations without cutting or permanent modification.
Can I install this kit myself?
Yes, the kit is designed for bolt-on installation with common hand tools.
Does this kit affect my Bronco’s alignment?
Installing this kit changes suspension geometry, so a professional alignment is recommended after installation.
Install Instructions
- Raise and safely support the front of the vehicle, then remove the wheels.
- Disconnect the sway bar end links from the lower control arms.
- Remove the sway bar mounting bolts from the frame on one side at a time.
- Install the ICON sway bar spacer between the sway bar bracket and the frame.
- Reinstall the factory mounting bolts through the new spacer and torque to specification.
- Repeat on the opposite side, then reconnect the sway bar end links.
- Reinstall the wheels, lower the vehicle, and torque lug nuts to specification.
- Have the vehicle professionally aligned after installation.
