DEI Easy Loom Split Wire Sleeve – 5/16″ x 20′
DEI Easy Loom Split Wire Sleeve, part 010651, is a self-wrapping braided sleeve that installs over wires and hoses without disconnecting anything, protecting a 5/16 inch bundle over a 20 foot length.
Key Features
- Split design wraps around wires and hoses without disconnecting either end
- Durable P.E.T. monofilament resists chemicals, UV rays, and moisture
- Self-extinguishing material tested to 302F with a 500F melting point
- Sized for lines approximately 5/16 inch (8mm) in diameter
- Made in the U.S.A.
Fitment
Universal split wire sleeve for wires, cables, and hoses approximately 5/16 inch (8mm) in diameter.
Specifications
| Detail | Value |
|---|---|
| DEI Part Number | 010651 |
| Inside Diameter | 5/16 inch (8mm) |
| Length | 20 feet |
| Material | P.E.T. monofilament, self-extinguishing |
| Tested To | 302F |
| Melting Point | 500F |
What’s Included
- One 20 foot length of DEI Easy Loom split wire sleeve, part 010651
About DEI
Design Engineering, Inc. (DEI) has engineered heat, sound, and wire management products in the USA since 1994, developing wraps, shields, and sound-deadening materials that protect vehicles and equipment from extreme heat and vibration.
Related Parts
- DEI Fire Sleeve 3/8in I.D. x 25ft Spool
- DEI Fire Sleeve 5/8in I.D. x 25ft Spool
- DEI Fire Sleeve 1in I.D. x 25ft Spool
- DEI Heat Sheath 1-1/4in I.D. x 50ft Spool
FAQ
What size wires does this fit?
It is sized for wires, cables, and hoses approximately 5/16 inch (8mm) in diameter.
Do I need to disconnect anything to install it?
No, the split design wraps around bundles without disconnecting either end.
What temperature can this handle?
It is tested to 302F and has a 500F melting point.
Is there a tool to help install this?
Yes, the Easy Loom Line Sleeve Tool – Small is designed to help feed wires through this size sleeve.
Is this resistant to fuel or chemicals?
The P.E.T. monofilament resists chemicals, UV rays, and moisture exposure.
Can this be trimmed to length?
Yes, trim any excess length with scissors or a utility knife once positioned.
Is this flame retardant?
Yes, the material is self-extinguishing.
Is this made in the USA?
Yes, this wire sleeving is manufactured in the U.S.A.
Installation Instructions
- Determine the wire, cable, or hose bundle that needs abrasion protection
- Open the split seam and wrap the sleeve around the bundle without disconnecting either end
- Use the DEI Easy Loom Line Sleeve Tool – Small (sold separately) to help feed wires through
- Trim excess length with scissors or a utility knife once positioned
