Restore Squadron 2.0 Optical Performance With a Direct Replacement Lens
The Baja Designs 6684012 is a replacement lens kit for the Squadron 2.0 light pod, restoring factory spot beam performance after impact damage, fading, or a beam pattern change without replacing the entire light housing.
Key Features
- Precision molded polycarbonate lens engineered specifically for the Squadron 2.0 housing
- Spot beam pattern designed and tested by Baja Designs optical engineers
- Includes a fresh gasket and O-ring for a proper weatherproof reseal
- Direct fit replacement, no modification to the Squadron 2.0 housing required
- Spot beam pattern concentrates light for maximum distance and long range visibility
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| Universal | Squadron 2.0 Light Pod |
Specifications
| Detail | Value |
|---|---|
| Part Number | 6684012 |
| Brand | Baja Designs |
| Type | Replacement Lens and O-Ring Kit |
| Compatible Housing | Squadron 2.0 |
| Beam Pattern | Spot |
| Material | Precision molded polycarbonate |
| Includes O-Ring | Yes |
| UPC | Not published by manufacturer |
What’s Included
- 1x 6684012 replacement lens
- 1x gasket/O-ring for reseal
About Baja Designs
Baja Designs has engineered off road and overland lighting in the United States since 1994. Its Squadron 2.0 platform is built around a modular lens and reflector system, letting owners swap beam patterns or replace a damaged lens without buying a complete new light.
Frequently Asked Questions
What is the 6684012?
The 6684012 is a Baja Designs replacement spot lens and O-ring kit for the Squadron 2.0 light pod housing.
Will the 6684012 fit my Squadron Pro or Squadron Sport?
No, this lens is sized specifically for the Squadron 2.0 housing and is not interchangeable with the Squadron Pro or Squadron Sport lens.
Do I need to replace the whole light to change beam pattern?
No, swapping to the 6684012 lets you change the beam pattern of an existing Squadron 2.0 pod without replacing the full housing.
Install Instructions
- Remove the light pod from its mount and set it on a clean, flat surface
- Remove the retaining screws around the perimeter of the lens
- Lift off the old lens and gasket, then clean the sealing surface of the housing
- Install the new 6684012 lens with the fresh gasket, aligning the mounting holes
- Tighten the retaining screws evenly in a crisscross pattern to seat the gasket fully
