Race-Inspired Carbon Fiber Rear Spoiler Purpose-Built for the 2024+ Ford Mustang
The AC-RSM24FDMU rear spoiler for the 2024+ Ford Mustang is built from 3K 2×2 twill carbon fiber using a vacuum-infused wet layup, delivering the iconic carbon weave with up to 50% weight savings over the factory steel panel. This part bolts directly onto the deck lid using the factory mounting points, no drilling, no body modification. The AC-RSM24FDMU pairs naturally with Anderson Composites’ matching trunk lids, diffusers, and aero components to build a fully coordinated carbon exterior with a track-ready character that carries over to every drive.
Key Features
- Material: 3K 2×2 twill carbon fiber, vacuum-infused wet layup
- Finish: marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish
- Weight savings: up to 50% vs. OEM factory spoiler
- Direct OEM bolt-on using existing deck lid mounting points
- Compatible with factory trunk release and power trunk mechanisms
- Pairs with Anderson Composites trunk lids, diffusers, and aero components
- Precision-molded from the OEM panel for an exact body line match
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2024+ | Ford | Mustang | See title for trim details |
Specifications
| Detail | Value |
|---|---|
| Part Number | AC-RSM24FDMU |
| Brand | Anderson Composites |
| Material | 3K 2×2 twill carbon fiber |
| Construction | vacuum-infused wet layup |
| Surface Finish | marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish |
| Weight Savings | Up to 50% vs. OEM spoiler |
| Mounting | Direct bolt-on, OEM deck lid mounting points |
What’s Included
- Anderson Composites carbon fiber rear spoiler (AC-RSM24FDMU)
- Mounting hardware (uses OEM deck lid mounting points)
Frequently Asked Questions
Does installation require drilling into the deck lid?
No. This spoiler uses the factory mounting points already on the deck lid. No new holes are required, the install is non-destructive and uses the OEM bolt pattern.
Will this affect the power trunk or factory backup camera?
No. The spoiler is designed around the OEM trunk lid geometry and does not interfere with the factory latch or release. On vehicles with a camera integrated into the spoiler mount area, verify the camera location relative to the new spoiler before ordering.
Can this spoiler be painted to match my vehicle?
Yes. The gel coat surface accepts standard automotive paint. Sand lightly, prime with a flexible composite primer, then apply basecoat and 2K clear coat for a color-matched result.
Does this spoiler pair with the Anderson Composites trunk lid?
Yes. Anderson Composites designs their spoilers to complement their trunk lids with consistent weave patterns and finish levels. Running both creates a seamless coordinated look across the entire rear of the vehicle.
Is this spoiler street legal in all 50 states?
Yes. This is a direct OEM-style replacement spoiler that does not alter any safety systems or exceed factory spoiler dimensions. It is fully street legal nationwide. California residents should note the Prop 65 disclosure at the bottom of this page.
How long does installation take?
Most installers complete the swap in one to two hours. The process involves accessing the mounting nuts from inside the trunk, removing the OEM spoiler, cleaning the deck lid surface, and securing the new spoiler using the factory mounting pattern.
What weight savings can I expect over the factory spoiler?
Anderson Composites carbon fiber construction achieves up to 50% weight savings over the factory unit. High-mounted rear weight affects the vehicle’s pitch dynamics, so even a modest reduction at this location has a measurable effect on handling balance.
Does this product come with a warranty?
Yes. Anderson Composites provides a limited manufacturer warranty on materials and workmanship. Coverage does not extend to impact damage, improper installation, or handling damage. Contact Anderson Composites for current terms.
Installation Overview
- Mask surrounding paint with painter’s tape to protect the deck lid finish
- Open the trunk and access the OEM spoiler mounting nuts from the underside of the deck lid
- Remove the OEM spoiler mounting nuts and lift the spoiler free from the deck lid studs
- Clean all mounting surfaces to remove adhesive residue and debris
- Test-fit the AC-RSM24FDMU to confirm alignment and gap before final fastening
- Set the spoiler onto the mounting studs and thread the nuts to hand-tight
- Adjust for uniform gap around the perimeter, then torque to factory specification
