1 Token for VVDI MB BGA Tool Mercedes-Benz Password Calculation
1.Overview
This token supports online password calculation through the EIS and a working key.
Features:
- Supports password calculation for all CAN protocol EIS systems.
- Compatible with BGA keys and other NEC keys.
- Supports password calculation for NEC V51 and V57 keys using a solder-free method.
Processing Time:
- Data acquisition time depends on the key version and typically ranges from 3.5 to 13 minutes.
- Most BGA key versions require approximately 5 minutes, while some versions can be completed in as little as 3.5 minutes.
- Server-side password calculation typically takes 30 seconds to 1 minute.
2.Support TypeW164W164 2009-W166, 197, 212, 218, 246W169, 209, 211W172, 204, 207W216W221W639 2009-3. FunctionsMode:OBD and IR adaptor, mode use for communicate with EISChassis:Select chassis number, you can detect it with auto detect in EIS ToolsData Acquisition:PressData Acquisition, It Will Continue with Following Steps Automatically1) Insert working key to ignition, waiting 15 seconds2) Insert working key to device IR reader, verify key and car3) Data acquisition4) Insert working key to ignition, waiting 30 seconds5) Insert working key to device IR reader, wait end…6) Save acquisition dataUpload Data:Upload saved acquisition data to server for calculate password.Attention:Once success calculate password for one SSID, the server will not accept calculate the acquisition data with same SSID in 2 hours. After 2 hours, acquisition data with same SSID upload to server will start with a new taskQuery Result:Query server calculation result. The password will fill in key password area automatically after success calculation. Use Copy copy password to clipboardAuto Reflash:Program will auto re-flash server result until theres no task for this device.You can start data acquisition once more while auto reflash startingStop acquisite after success: If you are run data acquisition while auto reflash running,program will stop the acquisition progress when find correct password4. About Query Result StatusQuery result support query calculation result in 24 hours, others don’t support Query result will display Time, SSID, Status, Filename (name when upload to server)
Status Has the Following Types:
1) Queuing: number x, require about y minutes, means your task need y minutes2) Processing: requires 1 minutes, means your task need 1 minute to finish3) Password: xxxxxxxxxxxxxxxx (Free), means success find password, Free show this task is calculated for free or this task already success calculated before4) Discard: Once you success calculate the password, in 2 hours, the upload acquisition data with same SSID will discard5) Already upload: means the server already have this file in queuing6) Pay for password calculation before upload: means your device doesnt have authorize for calculation. Contact your dealer and pay for password calculation7) Failed: means this task failed to get password, you can run data acquisition again.Failed task is always free
How to Check the Tokens?
